“Fantastic company! Jack was honest, professional and extremely knowledgeable. He explained everything that was wrong in great detail. Will definitely be calling him for any future plumbing needs.”
Service & Maintenance
Grease Trap Installation & Replacement for Commercial Properties
We install and replace grease traps and interceptors. That is the whole scope — correctly sized for your fixture load, set to the local ordinance, permitted and inspected. We do not offer pumping or ongoing maintenance, and we will point you to a licensed grease hauler for that side of it.
Installation and replacement only
To be plain about it: we size, supply, install and replace grease traps and interceptors. We do not pump them and we do not run maintenance contracts. If you need routine pumping and a maintenance log for the inspector, a licensed grease hauler handles that — tell us and we will point you at one we trust.
Sizing it correctly the first time
An undersized trap will never pass, no matter how often it is pumped. We size against the actual fixture and equipment schedule, not against whatever was there before, and we tell you in writing what the calculation was.
New installations
Interior units under a three-compartment sink, or an exterior in-ground interceptor with the excavation, the inlet and outlet invert levels and the flow control fitting all set correctly. Permitted, inspected, and signed off before we hand it over.
Replacements
A cracked interceptor, a failed baffle wall, or a unit that was simply never big enough. We cut out the old one, correct the pipework it was fighting, and set the right unit — sequenced around your trading hours so the kitchen keeps running.
What's included
- Installation and replacement only — no pumping or maintenance contracts
- Correct sizing against your real fixture and equipment schedule
- Interior traps and exterior in-ground interceptors
- Excavation, invert levels and flow control fittings set correctly
- Permits pulled and inspections scheduled
- Work sequenced around your trading hours
Questions
Grease Trap Installation & Replacement — questions we get asked
Do you pump or maintain grease traps?
No. We install and replace them, and that is deliberately the whole scope. Routine pumping and the maintenance log your inspector wants is a licensed grease hauler's job — ask us and we will point you to one.
How do you decide what size trap we need?
From your actual fixture and equipment schedule, not from what was there before. Plenty of the traps we replace failed because they were sized against the old kitchen. You get the calculation in writing with the quote.
Do you handle the permit and the inspection?
Yes — the permit is pulled in our name, the inspection is scheduled as part of the job, and the sign-off is handed to you at the end.
Where we work
Grease Traps near you
We cover these areas for service & maintenance. Each page is written for that town.
Related
Other service & maintenance services
Backflow Testing & Prevention
Annual backflow testing is not optional and the utility does not send a reminder twice. A missed test means a…
Learn moreCommercial Drain Cleaning
A blocked line in a restaurant, a medical suite or a multifamily building is not an inconvenience, it is lost…
Learn moreCommercial Water Heater Service
A commercial water heater failure closes a salon, stops a restaurant passing inspection and generates a very fast…
Learn morePreventive Maintenance Plans
Reactive plumbing is the most expensive plumbing there is. Everything is urgent, everything is after hours, and…
Learn moreSewer & Drain Camera Inspection
Guessing about a buried line is how a repair budget doubles. Twenty minutes with a camera tells you what the defect…
Learn moreReady to get it sorted?
Free estimates, upfront pricing, and a licensed plumber who explains what is actually wrong. Call us or send a message and we will come back to you fast.